Mr. John chang
Model No.: YZPST-DCR1059
Brand: YZPST
Productivity: 500
Transportation: Ocean,Air
Place of Origin: China
Supply Ability: 200
Certificate: ISO9000
HS Code: 85413000
Port: SHANGHAI
Payment Type: L/C,T/T,Paypal
Incoterm: FOB,CFR,CIF
HIGH POWER THYRISTOR PHASE CONTROL
YZPST-DCR1059
All ratings are specified for Tj=25 oC unless otherwise stated.
(1) All voltage ratings are specified for an applied 50Hz/60zHz sinusoidal waveform over the temperature range -40 to +125 oC.
(2) 10 msec. max. pulse width
(3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential waveshape to 80% rated VDRM. Gate open. Tj = 125 oC.
(5) Non-repetitive value.
(6) The value of di/dt is established in accordance with EIA/NIMA Standard RS-397, Section 5-2-2-6. The value defined would be in addi-
tion to that obtained from a snubber circuit, comprising a 0.2 F capacitor and 20 ohms resistance in parallel with the thristor under test.
Features: . All Diffused Structure . Center Amplifying Gate Configuration . Blocking capabilty up to 2100 volts
. Guaranteed Maximum Turn-Off Time . High dV/dt Capability . Pressure Assembled Device
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Average value of on-state current | IT(AV) |
| 1080 |
| A | Sinewave,180o conduction,Tc=80oC |
| RMS value of on-state current | ITRMS |
| 1700 |
| A | Nominal value |
| Peak one cPSTCle surge (non repetitive) current |
ITSM |
| -
18000 |
| A
A | 8.3 msec (60Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC 10.0 msec (50Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC |
| I square t | I2t |
| 1.6x106 |
| A2s | 8.3 msec and 10.0 msec |
| Latching current | IL |
| - |
| mA | VD = 24 V; RL= 12 ohms |
| Holding current | IH |
| - |
| mA | VD = 24 V; I = 2.5 A |
| Peak on-state voltage | VTM |
| 1.45 |
| V | ITM = 1000 A; Duty cPSTCle £ 0.01%; Tj = 25 oC |
| Critical rate of rise of on-state current (5, 6) | di/dt |
| 800 |
| A/ms | Switching from VDRM£ 1000 V, non-repetitive |
| Critical rate of rise of on-state current (6) | di/dt |
| 200 |
| A/ms | Switching from VDRM£ 1000 V |
ELECTRICAL CHARACTERISTICS AND RATINGS (cont`d)
Gating
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Peak gate power dissipation | PGM |
| - |
| W | tp = 40 us |
| Average gate power dissipation | PG(AV) |
| - |
| W |
|
| Peak gate current | IGM |
| - |
| A |
|
| Gate current required to trigger all units | IGT |
| - 350 - |
| mA mA mA | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = +25 oC VD = 6 V;RL = 3 ohms;Tj = +125oC |
| Gate voltage required to trigger all units
| VGT |
| - 3.0 -
|
| V V V | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = 0-125oC VD = Rated VDRM; RL = 1000 ohms; Tj = + 125 oC |
| Peak negative voltage | VGRM |
| - |
| V |
|
Dynamic
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Delay time | td |
| - | 0.7 | ms | ITM = 50 A; VD = Rated VDRM Gate pulse: VG = 20 V; RG = 20 ohms; tr = 0.1 ms; tp = 20 ms |
| Turn-off time (with VR = -50 V) | tq |
| - | 50 | ms | ITM = 1000 A; di/dt = 25 A/ms; VR³ -50 V; Re-applied dV/dt = 20 V/ms linear to 80% VDRM; VG = 0; Tj = 125 oC; Duty cPSTCle ³ 0.01% |
| Reverse recovery charge | Qrr |
| * |
| mC | ITM = 1000 A; di/dt = 25 A/ms; VR³ -50 V |
* For guaranteed max. value, contact factory.
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Operating temperature | Tj | -40 | +125 |
| oC |
|
| Storage temperature | Tstg | -40 | +150 |
| oC |
|
| Thermal resistance - junction to case | RQ (j-c) |
| 0.025 0.050 |
| oC/W | Double sided cooled Single sided cooled |
| Thermal resistamce - case to sink | RQ (c-s) |
| 0.010 0.020 |
| oC/W | Double sided cooled * Single sided cooled * |
| Mounting force | P | 24.5 | 26.7 |
| kN |
|
| Weight | W |
|
| 480 | g | About |
* Mounting surfaces smooth, flat and greased
CASE OUTLINE AND DIMENSIONS
Product Categories : Semiconductor Disc Devices(Capsule Type) > Phase Control Thyristor
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now
