Mr. John chang
Model No.: YZPST-IS-LED20
Brand: YZPST
Productivity: 100
Transportation: Ocean,Air
Place of Origin: China
Supply Ability: 1000
Certificate: ISO9001-2008,ROHS
HS Code: 85322210
Port: Shanghai
Payment Type: L/C,T/T,Paypal
Incoterm: FOB,CFR,CIF
LED lightning arrester
YZPST-IS-LED10
Since the LED lamps for the core of the device is a semiconductor diode, it can be extremely low or even overvoltage, 5-6V is enough to destroy the lamp beads,so it is necessary to select a special lightning protector to protect the power supply line of the LED from overvoltage and avoid the situation of large-area of the LED lamps and black lights in the same area caused by lightning strikes. This product is used for lightning and surge pulse protection of LED lamps.
The developed product of our company has the following characteristics :
1. This product is in series. The series connection type timely diagnose working state of the lightning protection and change in time to protect the lamps.
2. It has large absorption capacity for surge, low output residual voltage, compact appearance, optional waterproof structure, and easy installation.
Technical Parameters List
| Model | YZPST-IS-LED10 | YZPST-IS-LED20 |
| Nominal working voltage Un | 110/220/277V | 110/220/277V |
| Maximum continuous working voltage Uc | 150/275/320V | 150/275/320V |
| Withstand impact voltageUoc | 10KV | 20KV |
| Nominal discharge current In (8/20μs)
| 5KA | 10KA |
| Maximum discharging current Imax(8/20μs)
| 10KA | 20KA |
| Voltage protection level Up
| 1KV | 1.5KV |
| Rated load current IL
| ≤3A
| |
| Drain currrent Ir
| ﹤5μA
| |
| External dimension
| 95*53*30mm | |
| Response time Ta | ≤25ns | |
| Operating temperature range Tup | -40℃to +70℃ | |
| Water-proof function
| Optional | |
| Protection grade | IP33/IP65 | |
| Sheathing material
| Flame retardant thermoplastic material | |
| Interface mode
| Terminals | |
| Mode of connection
| Connection in series | |
| Fault indication
| Optional | |
Installation method
1) When the voltage parameters of the protector does not match the equipment operating parameter,it may affect the work of circuit. It is recommended to determine the device operating voltage when selecting.
2) Plug the power phase line (L) and null line (N)into corresponding connector of the electric Surge Protector and make sure it's firm and reliable. Connect the ground terminal of arrester with the ground lead of lightning protection appropriately (recommended earth resistance ≤4Ω ).
Product Categories : Surge Protector and Arrester
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now
